Select the stainless steel plate to consider the use of operating conditions, such as manual manipulation or active control, hot press performance and examples of the quality requirements of the pressing material such as hardness, light and so on. But also to consider the economic accounting, each time the new grinding of steel, requiring the production of a slow quality of the number of decorative panels.

In addition, the choice of steel plate of the most fair thickness, should consider the use of time, quality, stiffness, while thinking about the strength of the plate when the pressure requirements; thermal conductivity; pressure distribution, pressure plate format specifications.

If the thickness of the steel is not enough, easy to bend, the potential will affect the production of decorative panels. If the thickness is too large, the steel plate is too heavy, not only to increase the cost of steel, but also to the operation to bring unnecessary difficulties. At the same time also consider the stainless steel plate processing or use should leave the margin. The thickness of the copper plate is not the same, but trying to uniform the thickness of the steel sheet just the same, as is usually the medium size of the saw blade, the thickness of the service for the 0.05 to 2.1 mm. If the requirements are too strict, grinding costs will increase. The same is usually anti-tension, strong strength of steel, resistance to the greater the performance of the machine, the use of longer duration, but the grinding processing costs are also high.